Best Datex-Ohmeda OXY-F4-N Compatible adult finger clip SpO2 Sensor pulse oximeter
This compatible sensor connects directly to the bedside monitor without an extension cable. It works with the following patient monitors: Datex-Ohmeda : Aespire, Aespire 15, AS/3, AS/3 Compact, CS/3, S/5, S/5 Compact, CH/S, CH/2S, CH-RS, CG/2S, Cardiocap I, Cardiocap II, Cardiocap 5, Capnomac Ultima, Light Monitor, M-NESTPR, Oscar II, OSP-200, Satellite Trans, Satellite, Satellite Plus II, Trans Plus, System 5, ULTS00, OXY-E4-N, ULTSIO, ULTSVI, ULTSVO. 9-foot cable. Compatible sensors are available for the following Datex-Ohmeda
OEM part numbers:
· OXY-F4-N (Adult Clip)
· TS-F4-N (Adult Clip)
· SAF-F4 (Adult Clip)
· OXY-W4-N (Neonate Silicon Wrap)
· OXY-E4-N (Adult Ear Clip)
· TS-E4-N (Adult Ear Clip)
Specifications
· Datex ohmeda Adult spo2 sensor
· Latex free
· 3m TPU cable
· one year warranty
· High performance/price ratio for Reusable SpO2 sensor to save cost
· Easy to clean and repair
· Finger clip, Soft tip, Wrap, Multi-Y, Ear clip types available
· Available in adult, pediatric, infant and neonate sizes
· Different types are Compatible with most of patient monitors
· Safety: IEC 60601-1-1 approved, conformity with MDD 93/42/EEC and EN9919:2005
· Patient sizes: Pediatric
· Ambient temperature: 0 to 40°C(32 to 104°F)
· Relative humidity: 15% to 95%
· Measurement technology: Tri-wavelength LEDs & photo detector
· LED wavelength: 660nm/880nm/940nm
· SpO2 accuracy: ±3 (70-100%); Unspecified (0-69%)
· Pulse rate range: 20-250bpm
· Pulse rate accuracy: ±3 (20-250bpm)
· Packages: non-sterilization, individual package with instruction
Main technical parameters | |
Emitting light waven length |
660±5nm |
Absorbed light wavelength |
905±5nm or 940±5nm |
SpO2 testing range |
70%-100% |
SpO2 testing precision |
±1% in 90%~100% |
±2% in 80%~89% | |
±3% in 70%~79% | |
Testing range of pulse velocity |
30bpm~245bpm |
Testing precision of pulse velocity |
30bpm~59bpm,±1bpm |
60bpm~149bpm,±2bpm | |
150bpm~245bpm,±3bpm | |
Working environment requirements | |
Environment temperature |
5°C~40°C |
Relative humidity |
≤80% |
Atmospheric pressure |
700hPa~1060hPa |
We are a professinal manufacturer in mainland China,we have various brands of below item:
spo2 sensor,
ECG cable and leadwire,
EKG cable and leadwire,
IBP cable,
NIBP cuff & tubes ,
temperature probe,
holter cable and leadwire,etc.
EEG electrodes
Ecg Electrodes
Infusion cuff
Water trap
Heater wire cable