CAM UNIT 

Aerial Cam UnitAccording to the attachment mode of the slider, the commonly used cam units can be divided into three types:

The common cam units, the slide block attached to the lower die, is called the die amounted cam units;

The slider is attached to the upper die, and the die goes up with the upper die after work is finished, which is called the aerial cam units;

Double-acting cam units, the cam is made with the surface as the inclined plane, and the counter side block (also made as the sliding block, when the cam units move, it can drive the sliding block, which can realize the negative angle bending of the sheet material at one time. 

Specifications

UCMSC150 UCMSF150 SOUK65 SOUK100 SOUK200 UCNBK65 UCNBK100 Product 

Material:  FC250/SS400/S45C cam units and die components raw material 

Manufacturer: Working group for each procedure of producing. strictly quality control from raw material. according to CNC, mill, assembly by each workgroup. Ensure the quality excellent in each procedure, avoid wasting raw material in order to lower cost. 

Inspection: ZMCAM inspection divided into two parts: Human checking and equipment checking. For Human checking could find more point which equipment could not find. Also, equipment inspection will find more problem which human could not find. then products quality will completely keep best. 

ZMCAM Productslines:

1, Cam Units (standard and non-standard cam units design and manufacture)

2, Wear Plate

3, Bushings

4, Retainers

5, Gas Spring

6, Other auto mould components

ZMCAM supply pressing die components to all of the world, main market spread on European, America, South East Asia etc. 

FAQ

Q: What is the advantages of zmcam?

A: Excellent R&D, Precious Manufacture, Strictly Inspection. 

Q: How much time for standard cam units?

A: standard cam unit stock will delivered on day.if not,7 days will be delivery. 

Q: How about the inspection?

A:ZMCAM inspection divided into human inspection and equipment inspection. aims to avoid all the problems before delivery to the customer. 

Q: If the customer does not have the drawing of the standard cam unit.

A: Do not worry.zmcam will provide most of the cam unit drawing reference for our customer, if need non-standard drawings, send us and also could do by R&D.

http://www.zmcamunit.com/