Allows beginners to make welds like experienced technicians!
Your advantages with SIDM® Fiber Laser Welding Machine:
- Weld strength: Laser welds are strong, thin, and have a high depth-to-width ratio.
- Heat-affected zone: Because of the rapid cooling, the heat-affected zone is small, and the nearby material is not annealed.
- Metals: Lasers are capable of successfully joining a variety of materials, including carbon steel, high-strength steel, stainless steel, titanium, aluminum, and precious metals.
- Precision work is made possible by the small, precisely regulated laser beam, which enables precise micro-welding of tiny components.
- Minimal deformation or shrinkage exists in the parts.
- No physical contact exists between the substance and the laser head.
- Laser welding can be spot welding, requiring only one side’s access.
- Scrap: The amount of scrap produced by laser welding is manageable and minimal.
Handheld Fiber Laser Welding Parameters |
|
Power: |
1000W / 2000W/ 3000W (optional) |
Laser Wave length: |
1070NM |
Fiber length: |
Standard 10M / Maximum 15M |
Cooling type: |
Water cooling |
Working Environment Temperature: |
15 - 35℃ |
Welding Thickness Recommendations: |
0.5-5mm |
Working Voltage: |
220V/380V ( 50/60HZ) |
|
Traditional Welding Methods |
SIDM Laser Welding |
Speed |
Average |
Up to 4X Faster than TIG |
Quality |
Depends on user experience |
Consistent high-quality results |
Learning Curve |
Steep |
Quick and easy |
Material Flexibility |
Limited with consumables changes |
Wide range with no set up |
Distortion & Deformation |
High |
Very Low |
Heat Affected Zone |
Large |
Small |
Wobble Welding |
No |
Yes - up to 5 mm additional weld width |
http://www.cnsidm.com/